a paper path problem, etc.
|
Code |
Description |
|
A1-1 to A1-32 |
All indicate a paper path problem, etc. in the ADF. |
|
A2 |
ADF exit problems |
|
A3 |
Irregular size documents |
|
A5 |
ADF interlock |
|
A6 |
ADF single sheet document reset. |
|
A7 |
Platen interlock |
|
A8 |
ADF exit interlock |
|
C1 |
Tray 1 jam |
|
C2 |
Tray 2 jam |
|
C3 |
Tray 3 jam |
|
C6-1, C6-2 |
Jams related to duplex |
|
C6-3 |
Registration sensor, re tray 1 |
|
C7-1, C7-2 |
HCF feed problems |
|
C7-3 |
Tray 1 feed problem |
|
C8 |
Paper stays in tray or duplex or HCF |
|
C9 |
Bypass feed problem |
|
E1-10 to E1-25 |
Internal jam |
|
E1-6 |
Paper on registration sensor |
|
E2 |
Reset signal happened. Might read E-2 something else. |
|
E3-30 to E4-14 |
Exit jam |
|
E3-6 |
Exit jam |
|
E4-10 to E4-14 |
Inverter sensor not actuated. |
|
E4-15 |
Inverter sensor |
|
E4-40 to E4-45 |
Duplex entry sensor |
|
E4-6 |
Inverter sensor |
|
E5 |
Front door interlock |
|
E6-1 |
Tray 1 interlock |
|
E6-2 |
2 tray or duplex interlock |
|
E6-3 |
HCF interlock |
|
E7-2, E7-3 |
Duplex interlock |
|
E8-6 to E8-15 |
Duplex entry sensor |
|
F1-1 |
Sorter entry sensor |
|
F1-6 |
Sorter exit sensor |
|
F3 |
Paper size not available for sort/stack |
|
F5 |
Sorter interlock |
|
J1 |
Add toner |
|
J3 |
Replace copy cartridge |
|
J7 |
Replace copy cartridge |
|
J8-1 |
Wrong copy cartridge installed |
|
J8-2 |
Copy cartridge EEPROM |
|
L6 |
Auditron or other counter problem |
|
L8 |
Platen glass temperature is too high |
|
L9 |
Communication problem between interimage erase/edge lamps and main board |
|
U1-1 |
Main motor drive problem |
|
U2-1 to U2-4 |
Scan home sensor |
|
U3-1 |
Lens sensor |
|
U4-1 |
Open fuser thermistor |
|
U4-2 |
Fuser did not warm up properly |
|
U4-3 |
Fuser temperature too high |
|
U4-4 |
Fuser problem. Staying on too long |
|
U4-6 |
High fuser temperature |
|
U5-1 |
Sorter bin home switch not activated |
|
U5-2 |
Sorter bin home switch stayed actuated |
|
U5-3 |
Sorter bin home switch |
|
U5-4 |
Sorter bin home switch |
|
U6-1 |
ROM problem |
|
U6-2 |
RAM problem |
|
U6-3 |
Low battery |
|
U6-4 |
Incorrect value in NVM. Reinitialize main board with code 20-96 |
|
U8-1 to U8-6 |
Problem with exposure lamp, lamp sensor, lamp board |
