Xerox 1012, 1012(RE)
| Код ошибки | Описание | ||
| E1 | Jam between paper feed and fuser | ||
| E3 | Jam in fuser | ||
| E5 | Clam shell open | ||
| E6 | Paper feed section cover is open | ||
| J1 | Toner cartridge near empty | ||
| J3 | Drum cartridge not seated properly | ||
| J7 | Waste toner full (replace drum cartridge) | ||
| L6 | Key counter out | ||
| L8 | Exposure area overheat | ||
| U1 | No clock pulse (drive problem) | ||
| U2 | Scan problem | ||
| U3 | Lens/mirror problem (RE model only) | ||
| U4 | Heat problem | ||
| U8 | Exposure lamp control circuit problem | ||
| E1 | Jam between paper feed and fuser | ||
| E3 | Jam in fuser | ||
| E5 | Clam shell open | ||
| E6 | Paper feed section cover is open | ||
| J1 | Toner cartridge near empty | ||
| J3 | Drum cartridge not seated properly | ||
| J7 | Waste toner full (replace drum cartridge) | ||
| L6 | Key counter out | ||
| L8 | Exposure area overheat | ||
| U1 | No clock pulse (drive problem) | ||
| U2 | Scan problem | ||
| U3 | Lens/mirror problem (RE model only) | ||
| U4 | Heat problem | ||
| U8 | Exposure lamp control circuit problem |
