Toner cartridge not installed or
|
Код ошибки |
Описание |
|
A1 |
Document feeder problem. |
|
CH |
Toner cartridge not installed or not installed properly. |
|
H2 |
Sub code 0: Fuser thermistor. |
|
H3 |
Sub code 0: Fuser temperature too high. |
|
H4 |
Sub code 0: Fuser temperature too low. |
|
L1 |
Document feeder problem. |
|
L3 |
Scan return problem. Sub code is 0, but there is no more detail. Could be no scan drive; scan did not leave home; scan did not return home; scan overloaded; mirror motor problem; scan cable came off. |
|
L4 |
Sub code 1: Main drive problem. Sensor gear motor. |
|
L5 |
Sub code 2: Lens drive, motor, sensor |
|
P |
Paper feed. |
|
U2 |
Sub code 1: Main board EEPROM problem. 4: Memory problem. |
|
U5 |
Sub code 5: high temperature at exposing glass when using document feeder. |
|
CC |
Not sensing document on glass |
|
CH |
Door open/DV unit not installed properly |
|
EE |
DV did not set up properly |
|
EL |
DV problem-overtoned condition |
|
EU |
DV problem-undertoned condition |
|
H2 |
Fuser thermistor |
|
H3 |
Fuser temperature too high |
|
H4 |
Fuser temperature too low |
|
L1 |
Forward scan |
|
L3 |
Return scan |
|
L7 |
Developer unit shift problem |
|
PC |
Key counter |
|
U1 |
Dead battery |
|
U2 |
Battery problem |
