possible DV unit not installed
|
Код ошибки |
Описание |
|
0 |
Stepping motor |
|
10 |
Mirror motor |
|
40 |
Dark box switch |
|
8 |
Mirror motor |
|
A1 |
Document feeder problem. |
|
C1 |
Charge corona |
|
C2 |
Transfer corona |
|
C3 |
Discharge corona |
|
CH |
possible DV unit not installed properly |
|
CH |
Interlock or thermal fuse |
|
CH |
Toner cartridge not installed or not installed properly. |
|
H1 |
Heater thermal fuse |
|
H2 |
Sub code 0: Fuser thermistor. |
|
H2 |
Thermistor |
|
H3 |
High Temperature |
|
H3 |
Sub code 0: Fuser temperature too high. |
|
H4 |
Sub code 0: Fuser temperature too low. |
|
H4 |
Low Temperature |
|
H5 |
Lower thermofuse |
|
H6 |
Lower thermistor |
|
H7 |
High temperature in lower roller |
|
H8 |
Low temperature in lower roller |
|
L1 |
Document feeder problem. |
|
L1 |
Forward Scan |
|
L2 |
End of Scan |
|
L3 |
Return of Scan |
|
L3 |
Scan return problem. Sub code is 0, but there is no more detail. Could be no scan drive; scan did not leave home; scan did not return home; scan overloaded; mirror motor problem; scan cable came off. |
|
L4 |
PT/main motor |
|
L4 |
Sub code 1: Main drive problem. Sensor gear motor. |
|
L5 |
Lens |
|
L5 |
Sub code 2: Lens drive, motor, sensor |
|
L6 |
Charge block switch |
|
P |
Paper feed. |
|
P1 |
Copy lamp thermal fuse |
|
U1 |
Low battery |
|
U2 |
Data transfer |
|
U2 |
Sub code 1: Main board EEPROM problem. 4: Memory problem. |
|
U3 |
Dark box |
|
U5 |
Sub code 5: high temperature at exposing glass when using document feeder. |
