Lit Steadily: Sorter not installed,
|
Код ошибки |
Описание |
|
CC |
Original detection problem |
|
CH |
Lit Steadily: Sorter not installed, or not turned on |
|
CH |
Flashing: DV unit not installed, not connected properly, or not latched in place properly |
|
F1 |
Sub code 00: Communication error between main board and sorter. Sub code 02: Sorter transport motor drive. |
|
F2 |
Sub code 31: Image density sensor. Could be a problem with light level. Sub code 32: Drum mark sensor problem. Does not see mark on drum or sensor not working properly. |
|
H2 |
Sub code 00: Fuser thermistor open. |
|
H3 |
Sub code 00: Fuser temperature too high. |
|
H4 |
Sub code 00: Fuser temperature too low. Lamp, thermal switch, connections. |
|
L1 |
Scan forward problem. Motor, sensor, board |
|
L3 |
Scan forward problem. Motor, sensor, board. |
|
L4 |
Drive problem; main motor, gear, sensor, bind. |
|
L5 |
Lens problem. Motor sensor board. |
|
L8 |
Sub code 01: Zero cross. |
|
P |
Paper feed problem or no paper |
|
PC |
Card counter not installed |
|
U2 |
Sub code 01: Memory loss. |
|
U4 |
Sub code 00: Communication problem between copier and duplex unit. |
|
U5 |
Sub code 00: Communication problem between main board and ADF. |
