DV unit not installed, not
|
Код ошибки |
Описание |
|
CH |
Flashing: DV unit not installed, not connected properly |
|
CH |
Lit steadily: Sorter not installed or not turned on |
|
EE-EL |
During developer calibration, problem of some kind. Over toned |
|
EE-EU |
During developer calibration, problem of some kind. Under toned |
|
F1-00 |
Communication error between main board and sorter |
|
F1-02 |
Transport motor drive |
|
F1-04 |
Bin sensor problem. Upper or lower limit sensor problem |
|
F1-05 |
Sorter bin home sensor |
|
F1-06 |
Sorter bin motor drive |
|
F1-14 |
Take out sensor problem |
|
F2-31 |
Image density sensor problem |
|
F2-32 |
Drum mark sensor problem |
|
F2-35 |
Grid voltage correction will not work on the patch voltage is outside the expected range |
|
H2-00 |
Fuser thermistor open |
|
H3-00 |
Fuser temperature too high |
|
H4-00 |
Fuser temperature too low. Lamp, thermal switch, connections |
|
L1 |
Scan forward problem |
|
L3 |
Scan return problem |
|
L4 |
Drive problem; main motor, gear, sensor, bind |
|
L5 |
Lens problem |
|
L8-01 |
Zero cross (board problem) |
|
L8-03 |
Auto exposure sensor problem |
|
P |
Paper feed problem |
|
PC |
Card counter not installed |
|
U2-01 |
Memory loss |
|
U2-04 |
EEPROM error |
|
U5-00 |
Communication problem between main board and ADF |
|
U5-01 |
Registration sensor problem during adjustment, or adjustment value is not a valid number |
|
U5-02 |
Exit sensor adjustment problem; invalid adjustment value |
|
U5-11 |
Paper feed drive problem |
|
U5-12 |
Transport motor drive |
