Half speed scan home sensor
|
Код ошибки |
Описание |
|
E1-01 |
Scan home problem |
|
E1-21 |
Half speed scan home sensor problem |
|
E1-22 |
5th & 6th mirror unit sensor problem |
|
E1-23 |
Original registration input problem |
|
E1-32 |
No density detection of auto original |
|
E1-40 |
Optics fan not A working |
|
E1-41 |
Optics fan B not working |
|
E2-20 |
Bypass feed sensor |
|
E3-03 |
Toner density sensor |
|
E3-10 |
High voltage problem |
|
E3-20 |
Drive problem |
|
E3-22 |
blanking prevention film problem |
|
E3-29 |
Discharge lamp problem |
|
E4-01 |
Low fuser temperature |
|
E4-10 |
Fuser fan problem |
|
E5-01 |
24 volt problem |
|
E5-04 |
10 volt problem |
|
E5-35 |
EEPROM problem |
|
J00 |
Bypass feed jam |
|
J01 |
Cassette feed jam |
|
J02 |
Paper feed unit jam |
|
J06 |
Paper feed unit jam |
|
J08 |
Bypass feed jam |
|
J19 |
Bypass feed jam |
|
J20 |
Paper feed jam |
|
J21 |
Paper jam in registration area |
|
J30 |
Paper jam in center of machine |
|
J40 |
Fuser exit jam |
|
J41 |
Fuser exit jam |
|
J70 |
ADF jam |
|
o |
In power save mode. Press any key |
|
0 |
In standby mode. Press any key |
|
P-- |
Add paper |
|
U10 |
Document feeder interlock |
|
U13 |
Add toner. Could also be toner density sensor, toner feed system, or main board. Note: To clear U13, any key must be pressed. If this does not clear the U13, see F5-63 to determine which keys for which machine must be pressed. |
|
U16 |
Developer unit not installed properly, or connector problem. |
|
U6 |
Paper feed console interlock |
