Zero cross of DC power
Код ошибки |
Описание |
F18 |
Paper feed lift problem |
F18-3 |
LCT problem |
F18-4 |
LCT problem |
F28-1 |
Charge corona |
F28-2 |
Transfer or separator corona |
F34-1 |
High fuser temperature |
F34-2 |
High fuser temperature |
F35-1 |
Low fuser temperature |
F35-2 |
Low fuser temperature |
F36-1 |
Low fuser temperature |
F36-2 |
Low fuser temperature |
F41 |
Scan problem |
F42 |
Scan forward problem |
F43 |
Exposure lamp board problem |
F45 |
Lens home problem |
F52 |
Main motor drive problem |
F55 |
Zero cross of DC power supply |
F60 |
Communication interruption between machine and RADF |
F67 |
RDH or RADF drive problem |
F70 |
Communication problem between machine and sorter |
F77 |
Sorter, finisher, or stapler problem |
F86 |
Too many copies were made after toner waste was full |
F98 |
Duplex problem |
J10 |
Feed jam |
J11, J12 |
Jam in machine |
J13 |
LCT jam |
J14 |
LCT jam |
J15 |
Duplex feed jam |
J16, J17 |
Jam in machine |
J19 |
LCT jam |
J21 |
Jam around drum |
J31 |
Jam in machine |
J32 |
Exit jam |
J61, J62 |
RDH/RADF jam |
J63 |
RADF exit jam |
J72 |
Sorter jam or open interlock |
J74 |
Finisher problem |
J75 |
Stapler problem |
J92-J95 |
Duplex jam |
P17 |
Paper feed door open |
P19 |
LCT door open |
P33 |
Exit door open |
P51 |
Front door open |
P61 |
RADF cover open |
P64 |
RADF not opened to remove originals |
P64 |
RDH original width different with guide width |
P68 |
Original removed during operation or RADF |
P69 |
Original didn't feed during RADF/RDH operation |
P71 |
Sorter interlock |
P74 |
51 copies or more went into the stapler or paper was in the sorter/stapler, or different size originals were used in the staple mode |
P76 |
No staples |
P78 |
Stapler not installed |
P81 |
Key counter not plugged in |
P86 |
No toner waste box |
P91 |
Duplex unit pulled out |
P96 |
Paper in duplex tray |
P97 |
Wrong size paper during duplex |
P99 |
Too many reverse side copies during duplex. |