Power leakage of some kind.
Код ошибки |
Описание |
F09 |
Power leakage of some kind. Heat, exposure, AC or power supply. |
F23 |
Toner motor |
F26 |
Toner density adjustment problem. This means machine is undertoned. To repair, replace developer and enter "47" mode. Press 51. Press print. Allow the machine to cycle until it stops. Some feel that you should disconnect the toner motor first. This Код ошибки happens probably because either machine wasn't set up properly, or the customer kept on using the machine with the toner light on. |
F28 |
Corona problem. Could be any corona. Must reset with "25: mode, "P45" set to "0" |
F34 |
High fuser temperature |
F35, F36 |
Low fuser temperature |
F41 |
Scan home |
F42 |
Scan home |
F43 |
Exposure lamp |
F45 |
Lens problem |
F54 |
Fan motor |
F60 |
ADF to main board communication problem |
F67 |
ADF enКод ошибкиr |
F77 |
Sorter gate |
F88 |
AE adjustment problem |
J11-J13 |
Feed jam |
J16 |
Jam inside |
J31, J32 |
Exit jam |
J61, J62 |
ADF jam |
J63 |
ADF exit jam |
J72 |
Sorter jam |
P20 |
Drum unit or toner level connection problem |
P25 |
300 copies have been run since toner light came on. Depending on how 25 mode, Код ошибки 92 is set, machine may not work at all. |
P26 |
Must adjust TDS in 47 mode |
P64 |
ADF & operator are confused |
P68, P69 |
ADF feed problem |
P71 |
Sorter interlock |
P81 |
Key counter not installed |