No problem. Means that the
|
Код ошибки |
Описание |
|
C |
No problem. Means that the machine is correcting the fuser film tracking |
|
CC |
Drum must be changed. Could be the drum serial number is identified by the logic as being non-compatible to that particular copier |
|
E000 |
Low fuser temperature |
|
E001 |
High fuser temperature |
|
E002 |
High fuser temperature |
|
E003 |
Erratic fuser temperature |
|
E007 |
Fuser film off track and will not repair itself |
|
E010 |
Main drive problem |
|
E030 |
Counter problem |
|
E064 |
Scan problem, or power supply |
|
E202 |
Scan problem |
|
E210 |
Lens drive problem or lens sensor |
|
E220 |
Exposure lamp stays on or off |
|
E240 |
DC controller (main board) or composite power supply |
|
E261 |
Zero cross problem. Power frequency or composite power supply |
|
E400 |
Communication problem between boards |
|
E803 |
24 volt problem |
|
E0 |
Fuser problem |
|
H |
Fuser overheat |
