Toner motor, toner level sensor,
|
Код ошибки |
Описание |
|
E000 |
Thermistor |
|
E001 |
SSR |
|
E002 |
Thermistor, ht. Lamp thermal fuse or SSR |
|
E003 |
Thermistor, ht. Lamp thermal fuse or SSR |
|
E005 |
Fuser cleaning belt |
|
E010 |
Main drive problem |
|
E020 |
Toner motor, toner level sensor, toner hopper sensor |
|
E030 |
Counter |
|
E050 |
Duplex problem |
|
E203 |
Scan home problem |
|
E210 |
Lens home sensor |
|
E401 |
Document feeder paper pickup motor |
|
E402 |
Document feeder belt clock pulse problem |
|
E403 |
Document feeder main motor clock pulse problem |
|
E411 |
Document feeder sensor problem |
|
E500 |
Sorter/copier interface problem |
|
E500 |
An error is identified in the communication between the sorter and the copier |
|
E510 |
The clock signal from the motor is absent for 250ms or more |
|
E510 |
Sorter motor drive |
|
E513 |
The clock signal from the motor is absent for 250 ms or more |
|
E530 |
Sorter home sensor |
|
E530 |
The home position sensor (P17) fails to go OFF when an equivalent of 2560 pulses of the motor drive command has been generated |
|
E531 |
The stapler unit swing sensor (MS9) fails to go ON within 500 ms after the motor drive command has been generated. MS9 fails to go back OFF within 1000 ms after it has gone on |
|
E531 |
Stapler swing sensor |
|
E540 |
The lead cam home position sensor (P12) fails to go OFF within 2000 ms after the motor drive command has been generated. P12 fails to go back ON within 2000 ms after it has gone OFF |
|
E540 |
Sorter lead cam home sensor |
|
E541 |
Sorter lead cam home sensor |
|
E710 |
DC controller board |
|
E711 |
DC controller board |
|
E712 |
Document feeder problem |
