Canon 6012F
| Код ошибки | Описание | ||
| C | No problem. Means that the machine is correcting the fuser film tracking | ||
| CC | Drum must be changed. Could be the drum serial number is identified by the logic as being non-compatible to that particular copier | ||
| E000 | Low fuser temperature | ||
| E001 | High fuser temperature | ||
| E002 | High fuser temperature | ||
| E003 | Erratic fuser temperature | ||
| E007 | Fuser film off track and will not repair itself | ||
| E010 | Main drive problem | ||
| E030 | Counter problem | ||
| E064 | Scan problem, or power supply | ||
| E202 | Scan problem | ||
| E210 | Lens drive problem or lens sensor | ||
| E220 | Exposure lamp stays on or off | ||
| E240 | DC controller (main board) or composite power supply | ||
| E261 | Zero cross problem. Power frequency or composite power supply | ||
| E400 | Communication problem between boards | ||
| E803 | 24 volt problem | ||
| EO | Fuser problem | ||
| H | Fuser overheat |
